| 03.07.2023 10:00 |
Automotive Ethernet Interfaces for 10BASE-T1S Now Available |
|
Stuttgart, GERMANY, 2023-07-03 – Vector now supports the 10BASE-T1S standard in its VN5650 and VN5240 automotive Ethernet interfaces. Existing Vector Ethernet interfaces can also be quickly upgraded to 10BASE-T1S capability via a new physical layer module. This provides the user with ideal support for simulation, analysis and testing of 10BASE-T1S and 100/1000BASE-T1 networks. |
 |
|
| 03.05.2023 10:00 |
A Commitment to the Eclipse Foundation: Vector Supports the Community for Open Innovation and Collaboration |
|
Stuttgart, GERMANY, 2023-05-03 – Vector is strengthening its commitment to the Eclipse Foundation: In addition to contributing to the further development of the integrated development environment Eclipse IDE, the Stuttgart-based specialist for automotive embedded software and system networking is taking on a responsible position on the Board of Directors.
|
|
|
| 25.04.2023 10:00 |
ZEVonUDS - OBD Diagnostics Now Also For Electric Vehicles |
|
Stuttgart, GERMANY, 2023-04-25 - Vector Informatik offers a directly usable tool chain for the new diagnostic standard ZEVonUDS (SAE J1979-3). The new standard introduces on-board diagnostics (OBD) also for electric vehicles / zero emission vehicles (ZEVs) and plug-in hybrid electric vehicles (PHEVs). Tools must be made fit for the new standard across all areas of vehicle diagnostics. ... |
|
|
| 02.03.2023 10:00 |
Vector Expands Commitment to AUTOSAR |
|
Stuttgart, GERMANY, 2023-03-02 – Vector, the specialist for software and
the development of automotive electronics, is expanding its commitment to AUTOSAR (AUTomotive Open System ARchitecture). As a Premium Partner Plus (PP+), Vector is taking on extended steering tasks within the well-known development partnership. Vector is thus helping to shape the strategic direction of AUTOSAR, to ensure the performance of the standard for future ECU development, such as in the Software-Defined Vehicle (SDV). |
|
|
| 17.01.2023 10:30 |
vCDM Now as Software-As-A-Service |
|
Stuttgart, GERMANY, 2023-01-17 – Vector's calibration data solution vCDM 21.1 is now at the push of a button available as software-as-a-service. Collaboration within teams becomes easier and investment costs are reduced. |
|
|
| 13.12.2022 15:45 |
New Multi-Gig Ethernet Adapter for Portable Use |
|
Stuttgart, GERMANY, 2022-12-13 – Vector presents its compact multi-gig USB-to-Ethernet adapter VN5601. The adapter is not only high performing, its compact dimensions make it ideally suited for portable use. It also offers easy connection to Vector Hardware. This new adapter can be used for standard Ethernet IEEE 2.5GBASE-T as well as IEEE 1000BASE-T. |
|
|
| |
««
«
1
2
3
4
5
»
»»
|
