Groundbreaking technology in the audio market: Infineon launches class D audio brand MERUS™ with integrated multilevel amplifier ICs
Munich, Germany – 2 May 2019 – Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY) launches its MERUS™ brand, uniting the existing portfolio of multi-chip modules and discrete audio products under one umbrella. The brand will spearhead the belief that the best audio amplifier ICs
› produce sound in the speakers, not heat to the surroundings
› are to be heard, but not seen
› are smaller and lighter, not bulky and heavy
› must be robust and flexible, not delicate and demanding.
Following these principles, Infineon is introducing a family of highly power efficient monolithic class D audio amplifier solutions that will propel audio performance to the next level.

Building block for this performance is a new technology: the multilevel switching technology for class D audio amplifiers. Setting a benchmark in the audio market, this positively affects the amplifier evaluation parameters such as power consumption, solution size, audio performance, electromagnetic interference, and BOM cost. As a result, up to five levels of output signal modulation become feasible. Compared to their traditional counterparts, multilevel amplifiers use additional on-chip MOSFETs and capacitors to produce outputs with higher signal granularity, i.e. higher switching frequencies and scalable output signal levels. This results in a small form factor and virtually no switching loss measurable in idle mode.

Building on the above, Infineon introduces a family of four integrated multilevel audio amplifiers, the MA12040/P and the MA12070/P in two versions, respectively. They boast power consumption in the 250mW range. For this reason, they are suited for portable battery powered products and applications with challenging thermal conditions meeting the critical design objectives for modern audio applications.

Traditional class D amplifiers are only efficient at highest music volume levels resulting in high THD, which renders quality less useful for practical implementations. In realistic audio playback situations they consume significantly more input power (~1 W on average) than the first generation of MERUS integrated multilevel audio amplifier ICs (~0.25 W).

The newly introduced devices support up to four channels, which can be configured in parallel bridge-tied-load (PBTL), in bridge-tied-load (BTL) or in single-ended (SE) mode. As such, a single IC can output up to 160 W peak (16 A max) in a single PBTL channel or, for instance, it can be set up as a 2.1 system with 2 x 20 W tweeters as SE channels and 1 x 40 W woofer speaker as BTL channel. In addition, the products feature an advanced digital power management scheme, low THD+N (0.003 percent) and low EMI emissions.

Multilevel technology allows heatsink-free operation without filters. This reduces the bill of material and overall system costs due to reduced component count and minimized cooling requirements. The MA12040/P and the MA12070/P feature several protection modes such as undervoltage lockout (UVLO), short-circuit/overcurrent and DC protection, and over-temperature warning and error. The MERUS integrated multilevel class D audio amplifier ICs come in a 64-pin thermally enhanced QFN package with exposed thermal pad (EPAD).

Availability

The family of fully integrated ICs from the MERUS class D audio portfolio consists of the analog audio input versions, MA12040 and WiSA™ Endorsed MA12070, and the I2S digital audio input versions, the MA12040P and the MA12070P. All four devices can be ordered now. More information is available at www.infineon.com/merus.
About Infineon

Infineon Technologies AG is a world leader in semiconductor solutions that make life easier, safer and greener. Microelectronics from Infineon is the key to a better future. In the 2018 fiscal year (ending 30 September), the Company reported sales of €7.6 billion with about 40.100 employees worldwide. Infineon is listed on the Frankfurt Stock Exchange (ticker symbol: IFX) and in the USA on the over-the-counter market OTCQX International Premier (ticker symbol: IFNNY).

Follow us: TwitterFacebook - LinkedIn
 
 
 
» Infineon Technologies
» Press Releases
» Press Release
Date: 02.05.2019 10:15
Number: INFPMM201905-063e
» Press Photos

 Download der hochauflösenden Version...
The MERUS™ class D audio amplifiers MA12040/P and the MA12070/P support up to four channels, which can be configured in parallel bridge-tied-load (PBTL), in bridge-tied-load (BTL) or in single-ended (SE) mode. In addition, the products feature an advanced digital power management scheme, low THD+N (0.003 percent) and low EMI emissions.
» Contacts
Infineon Technologies AG

Media Relations
Tel: +49 89-234-28480
Fax: +49 89-234-9554521
media.relations@infineon.com

Investor Relations:
Tel: +49 89 234-26655
Fax: +49 89 234-9552987
investor.relations@infineon.com
» More Press Releases
21.05.2019 11:15
Infineon strengthens its solution offering for cloud applications as Advanced Technology Partner to Amazon Web Services

10.05.2019 12:45
Volkswagen relies on Infineon for its electric future

07.05.2019 16:45
Infineon scales up volume production and accelerates roll-out of CoolSiC™ MOSFET broad portfolio in discrete housings

07.05.2019 16:45
Higher efficiency for EV DC charging and other industrial applications: New CoolSiC™ Schottky diode 1200 V G5 portfolio from Infineon

07.05.2019 07:33
Second-quarter revenue and earnings in line with expectations, challenging market environment persists