Risk-free debugging with iSYSTEM Galvanic Isolation Adapters
Preventing personal injury and electrical damage to both development equipment and target
Schwabhausen, Germany, December 14, 2021 – Developing and testing embedded systems means working with a live target system which is under the power. For embedded designs which feature high-voltage circuits like Automotive battery management systems, iSYSTEM offers a series of Galvanic Isolation Adapters which prevent developers from personal injury and equipment from electrical damage without affecting signal integrity.

Galvanic isolation is required where two or more electric circuits communicate with each other, but their grounds may be at different potentials. It is an effective method of breaking ground loops between the different circuits, preventing unwanted current from flowing between the two units sharing a ground conductor. Galvanic isolation is also important for safety reasons, preventing accidental current from reaching ground through a person's body.

The iSYSTEM Galvanic Isolation Adapters are being interposed as electrical isolation between development equipment like a development PC on one side and on the other side e.g., the iC5700 BlueBox debugger and the target microcontroller. The BlueBox and the embedded target are separately powered and isolated from each other. The Galvanic isolation adapters are powered separately as well via a USB-C Power supply adapter. A grounding wire connected to the BlueBox and the embedded target circuit wires out the ground potential – which can exceed well over 1000V even before any of the devices are powered up – between the two components and prevent their destruction.

The adapters provide a basic isolation that withstands high voltages. However, when dealing with potentially hazardous voltages it is mandatory to have a second protection measure in place, in case the first insulation barrier fails.

The iSYSTEM Galvanic Isolation Adapters are available for Infineon AURIX, Arm Cortex and NXP / STMicroelectronics Power Architecture MCUs.

Further Links and Resources

iSYSTEM has been developing and manufacturing tools and solutions for embedded software development and testing since 1986. The privately held company, with a team of over 80 employees allocated to 5 locations in Europe and the US, advises its customers on solving challenges in proving that the software inside a microcontroller or microprocessor will do what it was built to do. iSYSTEM tools can detect software errors and help to correct them thus making embedded systems safer to use in versatile applications of different industries. For more information visit www.isystem.com or follow us on www.linkedin.com/company/isystemtools and www.youtube.com/user/iSYSTEMEmbedded.
» Press Releases
» Press Release
Date: 14.12.2021 10:00
Number: PR0721_Galvanic-Isolation EN
» Press Photos

 Download der hochauflösenden Version...
iSYSTEM Galvanic Isolation Adapters protect developers and development equipment.

 Download der hochauflösenden Version...
Typical setup: The iSYSTEM Galvanic Isolation Adapter is interconnected between development PC and debugger (here an iC5700 BlueBox) and target MCU.
» Contacts
Erol Simsek
tel.: +49 (8138) 6971-56
e-mail: erol.simsek@isystem.com
» Contact Agency
Catherine Schneider
tel.: +49 (0)8143 59744-27
e-mail: catherine.schneider@mexperts.de
» More Press Releases
12.05.2022 10:00

22.03.2022 14:30
iSYSTEM’s Tools support Infineon AURIX™ TC4x

17.02.2022 14:00
iSYSTEM’s BlueBox supports RISC-V

25.01.2022 10:00
Timing Measurement for all NXP S32K3 devices with a new iSYSTEM Emulation Adapter

14.12.2021 10:00
Risk-free debugging with iSYSTEM Galvanic Isolation Adapters